Recently I was in my local hardware store and I came across a product display of Peel & Stick Metal Tile by a company called Aspect. Well, I’m always on the look out for new products for our clients and I just had to share. This product gives off a high impact, high-style way to add beauty and value to your home.
If you’re looking into upgrading your kitchen or bathroom with a product that’s clean, affordable and well, on a mission to complete a Do It Yourself project or are considering hiring a local home improvement company to install them for you, well here is Peel & Stick Metal Tile project that might be right for you! Aspect Peel & Stick Metal Tiles come in varies finishes such as Champagne, Stainless Steel, Bronze and Copper. As well they come in a long grain and short grain direction.
You can achieve that high impact, modern look of metal at a fraction of the cost. Choose from many styles, shapes and colours to suit your every mood. Aspect Peel and Stick Metal Tiles are Eco-Friendly and manufactured from 50% recycled materials and 100% recyclable. So what’s your style? To find out more visit Aspect Peel & Stick Metal Tile’s Website at: www.aspectideas.com.
Summary of Installation According The Instructions:
Plan and Prep
With so many tile patters to choose from, choose the design that best fits your style and decor. Prepare and prime the surface you’re applying tile on. This product can be installed over most structurally sound substances if they are clean, smooth, dry and free of dust, wax and grease.
Layout & Measurements
All area to be covered must be measured. Lay out the entire project on a flat surface, like a table or the floor, before installing the tiles to be sure you have enough tiles and your design correct. Using a chalk line, create at least two reference lines to guide tile placement.
Peel and Stick & Enjoy!
“Dry Fit” Tile against the wall exactly where it will be placed. Once stuck, it stays stuck.
Remove the backing from the tile to expose the adhesive, and align the tile where you want it and press into place.
Firmly press the tile over its entire surface area to be sure it adheres properly. Install remaining tiles in the same fashion as above.
According to the labelled instructions: Minimal Tools Required
– Measuring Tape
– Straight Edge
– Pencil or Other Non-Permanent Marker
If Cutting Tiles Tools Required:
– An Electric Jigsaw is recommended
– A Hacksaw, miter saw, or sharp utility knife will also work
– Fine-grit sandpaper (400-600 grit)
DIY Aspect Backsplash Tile Installation Video
“Don Of All Trades Professional Home Maintenance Services. We’re MORE than you’d expect!”
For more information or to post a comment : please visit our links below:
Website – http://www.donofalltrades.ca/
Facebook – https://www.facebook.com/donofalltrades.info
Twitter – https://twitter.com/donofalltrade